Google has turned off its Stadia cloud game streaming service, but it’s giving the wireless Stadia controller a second chance as a Bluetooth controller that can be connected to PCs, Macs, phones, and presumably other devices, too. The change won’t happen automatically; it’s a manual process that can’t be reversed. What’s more, you only have until December 31st, 2023, to do the switch to enable Bluetooth wireless. After that date, any unconverted Stadia controller will still work as a wired USB gamepad, but it’ll be locked out of playing games wirelessly.
I’m going to walk you through the process for converting your Stadia controller by using Google’s browser-based tool.
Charge your controller, plug it in, and open the tool
- Make sure your controller is charged above the 10 percent level. (It won’t let you proceed until it has enough charge.)
- Open Google’s Stadia controller update tool in Chrome or Microsoft Edge. (Signing in to your Google account isn’t necessary or even possible to complete this process.)
- Click the start button in the Switch to Bluetooth mode section. You’ll be prompted to agree to Google’s terms of service. (Agreeing is the only option that lets you proceed.)
Allow the browser to verify the controller
- Next, you’ll need to allow your browser to verify the controller. Click the Allow Chrome to verify button.
- This will cause a small drop-down window to appear in the top-left corner of your browser. Your Stadia controller should be visible. Choose the Connect option.
Follow the on-screen button prompts to unlock your controller’s firmware
At this point, the tool will show you a set of button commands that are necessary to press in order to allow the Wi-Fi to Bluetooth conversion to transpire. Here are the button prompts in order:
- First, unplug your controller. In the instructions, Google notes that if it turns on again, you should hold the Stadia button for four seconds to force it to shut down.
- Hold the options button (it looks like an ellipsis with three horizontal dots) while plugging in the controller. The instructions note that the status light underneath the main Stadia button should remain unlit and that you should try the process again if it turns on.
- Finally, press the same options button, plus the Google Assistant button (featuring four differently sized circles) just beneath it along with A and Y. That’s four buttons in total. (The instructions say there won’t be a rumble or any kind of controller feedback.)
Allow the browser to download the Bluetooth mode update
In order to install the update, you’ll have to once again select your controller, following a similar process from earlier.
- Hit Allow Chrome to download.
- Select Connect within the drop-down window in your browser. This time, it may be listed as SP Blank RT Family, Stadia Controller, or USB COMPOSITE DEVICE.
Allow your browser to install the Bluetooth mode
Once again, the next step has you allowing the browser to install the update. Select the controller (it could go by any of the names listed in the previous step) for the final step that enables Bluetooth.
How to connect to devices via Bluetooth
To connect your Stadia controller wirelessly to devices over Bluetooth, hold the Y and Stadia buttons simultaneously for two seconds, and the status light will flash orange to indicate that it’s in pairing mode. Google notes that, once it’s paired to a device, it’ll auto-connect to the last paired device when turned on.
Correction January 17th, 4:42PM ET: A previous version of this article incorrectly mentioned that Stadia controllers that miss the December 31st, 2023, update window will be useless. However, they will still work as wired USB controllers.
Updated January 18th, 8:30AM ET: Slightly adjusted to reflect that the Stadia service has been shut down.
